Bring outdated home details back to life with the perfect Krylon color. Refresh a tasteful architectural accessory that will enhance your home experience with Krylon Easy Home Improvement Projects. Great weekend home improvement projects just got easier with Krylon.
Outdoor Light Refresh
Accent your front porch, back porch and patio lights with the latest paint colors. In a well-ventilated space, cover a flat surface with a drop cloth or tarp. Before starting, read labels for safety, application, and dry time instructions. Remove lightbulb from light fixture. In a separate area from where you will paint, make sure the surface of the light fixture is clean, dull, and dry. Use sandpaper to remove any uneven surface if necessary. Wipe clean to remove all debris. Spray paint the light fixture with Fusion All-In-One in Gloss. Allow to dry fully before screwing in lightbulb and reinstalling.
Beverage Cart Repaint
Sand the cart with wet-dry sandpaper. Dip the sandpaper into the water and sand, dipping as needed to wipe away residue and clean the paint from the sandpaper. Dry the cart with a towel and then wipe down again with a paper towel. Allow to dry. Using a tack cloth remove any dust particles. Spray all surfaces with primer. Allow to dry. Spray the cart with your choice of Rust Protector color. Let the paint harden for 72 hours before using.
Metal Security Door
Set up a work area and cover it with a drop cloth. Make sure it’s well-ventilated. Use painter’s tape to completely tape off any area that you do not want painted.
Use sand paper to thoroughly remove dirt, oils, dust and rust. Wipe down with damp rag. Applying in a well-ventilated area, prime door using the Krylon Rust Tough, holding the can 6-8 inches from the surface and using a sweeping side-to-side motion with slight overlap.
Continue to apply light, multiple coats of Krylon Rust Tough Enamel waiting 30-60 seconds between each, until you are satisfied with the appearance. Make sure the door is completely dry before removing the painter’s tape and masking paper.
Krylon Rust Tough dries in 25 minutes or less, and can be handled in less than one hour, although one may want to wait a few hours before reattaching the hardware and hinges. FYI, the security door pictured here was painted without removing hinges or door knob.
Painted Picture Frames
In a well-ventilated space, cover a flat surface with a drop cloth or tarp. Before starting, read the Krylon labels for safety, application, and dry time instructions. Remove the backing and glass from the frames.
Place picture frames on the covered surface. Make sure to leave enough room between each frame to avoid overspray. Prime and paint a minimum of two coats on the frames, allowing each coat to dry before the next coat. Allow frames to fully dry before rehanging.